netis P106C 6 Port PoE Switch

4,900.00 KSh +VAT

• Supporting 802.3 Ethernet, 802.u Faster Ethernet;
• Supports POE IEEE 802.3af/at compliant Powered Device (PD)
• Ports 1~4 features POE power supply capability and can be used as Power over Ethernet devices;

Description

netis P106C 4POE+2RJ45 100M Standard POE Switch

Netis P106C is a 100M standard POE switch that provides 6*10/100M adaptive RJ45 ports. Ports 1~4 features POE power supply capability and can be used as Power over Ethernet devices. The power supply port can automatically detect and recognize the powered device that complies with the IEEE 802.3af/at standard and supply power through the network cable.Supports two modes: normal switch mode/250M ultra-long transmission. P106C makes it easier for you to deploy wireless access point (AP) and IP terminal network devices using POE technology.

Features of netis P106C PoE Switch

netis P106C PoE Switch Kenya• Supporting 802.3 Ethernet, 802.u Faster Ethernet;
• Supports POE IEEE 802.3af/at compliant Powered Device (PD)
• Modes: Normal switch mode/Extended mode(Port1-4:250Metres ultra-long transmission)
• Ports 1~4 features POE power supply capability and can be used as Power over Ethernet devices;
• Auto MDI/MDIX crossover for all ports
• Support full duplex based on IEEE802.3x and half duplex based on Backpressure
• Support non-blocking wire speed forwarding
• MAC address auto-learning & auto-aging
• Steel case,the total POE power budget of 65 W
Plug and play
netis P106C PoE Switch Kenyanetis P106C PoE Switch Kenyanetis P106C PoE Switch Kenyanetis P106C PoE Switch Kenyanetis P106C PoE Switch Kenyanetis P106C PoE Switch Kenyanetis P106C PoE Switch Kenya

Hardware
Interface

4*10/100Mbps POE ports(Data/Power)

  2*10/100M uplink RJ45 ports (Data)

 Basic function

 Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol

 Supports POE IEEE 802. 3af/at compliant Powered Device (PD)

 Store-and-forward switching scheme
 Support IEEE802.3X full duplex and Backpressure half duplex
 MAC address auto-learning & auto-aging

 Standards

 IEEE 802.3 10BASE-T Ethernet

 IEEE 802.3i 10BASE-T Ethernet

 IEEE 802.3u 100BASE-TX Fast Ethernet
 IEEE 802.3af/at, Power over Ethernet
 IEEE 802.3x Flow Control

 Mode

 Normal switch mode/Extend mode

 Data Transfer Rate

Etherent:10Mbps(Half-duplex);20Mbps(Full-duplex)

Fast Entherent:100Mbps(Half-duplex);200Mbps(Full-duplex)

 Store & Forwarding

Yes

 Switching Capacity

1.2G

 MAC Address
  Table Size

2K

 Jumbo Frame

 2048 byte

 Environment

 Operation Temperature:0℃~40℃
 Storage Temperature:-40℃~70℃
 Operation Humidity:10%~90% RH Non-condensing
 Storage Humidity:5%~90% RH Non-condensing

 Power Input POE
 Standards

 Single port maximum power 30W,

 Whole switch maximum power 58W

 Support over-current,over-voltage and short-circuit protection

 Support Soft Start of High  Power PD

 Support sequential boot-up
 Power Supply Pin:12+/36-
 AC 110~240V 50/60HZ

 Cabling type

 100Base-TX: Cat 5e or better UTP/STP(≤100m)

 10Base-TX: Cat 5e or better UTP/STP(≤250m)

Dimensions
(L x W x H )

 124mm*115mm*33mm

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “netis P106C 6 Port PoE Switch”

Your email address will not be published. Required fields are marked *